1. Parametric cylindrical solar collector with an optimized secondary reconcentrator that is an evolution of the Helmet collector, formed by a primary symmetrical discontinuous reflector with a non parabolic geometry in its entirety, characterized in that the geometry of the primary reflector comprises at least two symmetrical sections with a parametric geometry (9), a parabolic section (8) centrally located between two parametric sections, with the parabolic section located closer to the absorber tube (6) than the symmetrical sections with a parametric geometry (9) and an optimized secondary (5) that functions as a receptor tube and as a secondary reconcentrator and which comprises an interior absorber tube (6) with a selective absorbing coating and an exterior glass tube (6\u2032) partially mirrored (10), with the mirrored part being placed either on the outside or on the inside of the glass tube.
2. Parametric cylindrical solar collector with an optimized secondary reconcentrator according to claim 1, characterized in that the central body of the collector’s structure (7) is embedded in the discontinuity that is formed between the symmetrical sections of the primary reflector (9), with the collector’s center of gravity being very close to the axis of rotation of the collector itself.
3. Parametric cylindrical solar collector with an optimized secondary reconcentrator according to claim 1 characterized in that the parabolic section (8) is divided into several independent sections.
4. Parametric cylindrical solar collector with an optimized secondary reconcentrator according to claim 1 characterized in that the non mirrored part of the glass tube (6\u2032) has an anti reflecting coating to optimize the absorption of solar light.
5. Parametric cylindrical solar collector with an optimized secondary reconcentrator according to claim 1 characterized in that the interior absorber tube (6) and the exterior glass tube (6\u2032) are not coaxial.
6. Parametric cylindrical solar collector with an optimized secondary reconcentrator according to claim 1 characterized in that the interior absorber tube (6) and the exterior glass tube (6\u2032) have a non circular geometry.
7. Design process of a parametric cylindrical solar collector such as the one described in the above claims which comprises the following stages:
With \u03c6 being the half angle of acceptance of the radiation impacting the primary reflector (1) first the curve of the geometric location is drawn for the points from which it is possible to emit light confined in an opening angle \u03b8 equal to 2\u03c6 so that the end rays of the aforementioned light beam (4) are tangent to the absorber tube (6), one of them without any reflection over the secondary reconcentrator (5) and the other after a single reflection over the aforementioned reconcentrator (5); the end point (11) of this curve, the complete geometry of the secondary reconcentrator (5), mirrored (10) and the relative position between the absorber tube (6) and glass tube (6\u2032), are obtained imposing the condition of symmetry and forcing that, for the point in question (11), all of the intermediate rays (4) placed between the aforementioned end rays reach the absorber tube (6) after one or no reflections in the secondary reconcentrator (5).
Secondly, the curve which, passing through the point (11), ensures that the impacting rays perpendicular to the wave front inclined to an angle \u03c6 with respect to the horizontal in a clockwise direction are reflected tangent to the absorber tube (6), is drawn; both of the previous curves intersect at points (11) and (11\u2032) and define the limits of the curve of the primary reflector’s right parametric section (9); the left parametric section of the primary reflector is symmetric to the latter.
The second section of the primary reflector’s geometry is a parabolic section (8); both end points (12) of the parabolic section (8) meet three conditions: they are symmetrical, they see the tube (6) with an acceptance equal to or higher than that of the design and they do not block the light beam reflected by point (11\u2032) and its symmetrical one. In these two points (12) both discontinuities in the geometry of the primary are manifested.
The claims below are in addition to those above.
All refrences to claim(s) which appear below refer to the numbering after this setence.
1. A substrate for a magnetic recording medium having a disc shape with a central hole and having at least a magnetic layer on the surface of the substrate,
wherein the substrate has a principal surface and a surface roughness of the principal surface of the substrate is 1 angstrom or less in terms of root mean square roughness (Rq) when a space period (L) of an undulation in a circumferential direction is in the range 10 to 1,000 \u03bcm, and
wherein when a component in a vertical axis direction of a line segment Z connecting a point A with the space period (L) of 10 \u03bcm and a point B with the space period (L) of 1,000 \u03bcm in a curve S marked on a double logarithmic graph which is obtained by analyzing the surface roughness using a spectrum and in which a horizontal axis is set to the space period (L) (\u03bcm) and the vertical axis is set to a power spectrum density (PSD) (k\xb7angstrom2\xb7\u03bcm) (where k is a constant) is defined as H and a displacement at which the component in the vertical axis direction of the curve S is at a maximum with respect to the line segment Z is defined as \u0394H, a value (P) expressed by (\u0394HH)\xd7100(%) is 15% or less.